Acura 2008 TL Uživatelský manuál Strana 358

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 376
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 357
Make sure the gas tank is nearly,
but not completely, full (around
3/4).
Without touching the accelerator
pedal, start the engine, and let it
idle for 20 seconds.
If you take your vehicle for an
emissions test shortly after the
battery has been disconnected or
gone dead, it may not pass the test.
This is because of certain ‘‘readiness
codes’’ that must be set in the on-
board diagnostics for the emissions
systems. These codes are erased
when the battery is disconnected,
and set again only after several days
of driving under a variety of
conditions.
If the testing facility determines that
the readiness codes are not set, you
will be requested to return at a later
date to complete the test. If you must
get the vehicle retested within the
next two or three days, you can
condition the vehicle for retesting by
doing the following.
Make sure the ambient
temperature is between 40° and
95°F.
Make sure the vehicle has been
parked with the engine off for 6
hours or more.
Keep the vehicle in Park
(automatic) or neutral (manual).
Increase the engine speed to 2,000
rpm,andholditthereuntilthe
temperature gauge rises to at least
1/4ofthescale(about3minutes).
Without touching the accelerator
pedal, let the engine idle for 20
seconds.
1.
2.
3.
4.
5.
6.
Testing of Readiness Codes
Emissions Testing
Technical Inf ormation
355
07/06/12 17:39:08 31SEP640 0360 
2008 TL
Table Of Contents
Main Menu
Zobrazit stránku 357
1 2 ... 353 354 355 356 357 358 359 360 361 362 363 ... 375 376

Komentáře k této Příručce

Žádné komentáře